UNIC Stainless steel cylinders
For further information please contact us by calling +45 7013 2300 or write an email to sales@hncgroup.dk

Standard cylinder (Ø32 - Ø63)

A standard UNIC Stainless Cylinder® (Ø32-Ø63) is equipped with a permanent magnet and adjustable end stroke-cushioning. Standard UNIC Stainless Cylinder® is fitted with nitrile rubber (NBR) / polyurethane (PU) packings and POM piston.

Max pressure: 10 bar
Temperature: -20°C to +80°C
Standard stroke: 10-500 mm.

Rustfrie cylindre

Standard DIN/ISO 15552
This cylinder is designed according to standard DIN/ISO 15552 and can replace other cylinders designed according to DIN/ISO 15552.

Rustfrie cylindre

Materials
Piston rod, mounting accessories, tube,
end caps and adapter: AISI 304 / (EN 1.4301)*
Piston: POM / Aluminium
Wiper: Nitrilgummi / Polyurentan
O-rings: Viton
*Available in AISI 316L (EN 1.4404)

Rustfrie cylindre

Magnet for sensing
All cylinder are standard fitted with a magnet. By using a reed switch, it is possible to detect the piston position.

Rustfrie cylindre

Adjustable cushioning
With the right kind of end cushioning, you can increase the efficiency of your entire pneumatic system. To adjust the braking effect with the adjustable screw, which is mounted on the cylinder.

Rustfrie cylindre

Cylinder with extra-high chemical resistance
When ordering a cylinder with high resistance to chemicals, add the letter ’’C’’ to the end of the product number.

Rustfrie cylindre

Heat-resistant +150°
A heat-resistant UNIC Stainless Cylinder® can run in ambient temperatures up to +150°C. When ordering a heat-resistant cylinder, add the letter ’’H’’ to the end of the product number.

Rustfrie cylindre

Adapter
It may be advantageous to fit an extra front adapter if the cylinder is used in an aggressive environment that leaves deposits on the piston rod. The adapter is, therefore, fitted with a highly chemical-resistant and hard scraper made of PTFE. When ordering a cylinder with adapter, add the letter „A1 or A2“ to the end of the product number.

Rustfrie cylindre

Cylinder with spring
All cylinders are available as single action (ON request).

Assembly
All cylinders are assembled by thread and are therefore serviceable.

Please note: All measurements are for 0,0 mm stroke.

Unic rustfrie cylindre

Type 0914 and 1114
Double-acting standard cylinder DIN/ISO 15552 (Ø32 - Ø63)

Flat rear cap.

Unic rustfrie cylindre

Type 0916 and 1116
Double-acting standard cylinder DIN/ISO 15552 (Ø32 - Ø63)

Rear cap with swivel mounting.

Unic rustfrie cylindre

Type 0918 and 1118
Double-acting standard cylinder DIN/ISO 15552 (Ø32 - Ø63)

Rear cap with clevis.

Unic rustfrie cylindre

Type 0924 and 1124
Double-acting standard cylinder DIN/ISO 15552 (Ø32 - Ø63)

Rear cap with spherical bearing.

Unic rustfrie cylindre

Type 0926 and 1126
Double-acting standard cylinder DIN/ISO 15552 (Ø32 - Ø63)

Rear cap with thread for mounting.